Product Introduction

Based on extensive market visits and user feedback, in order to better serve each user and solve problems such as high sand and mud content and on-site installation and construction, Tengyu New Creation Company optimized and analyzed existing equipment, and developed a two washing, one recycling, and one dehydration equipment. This equipment has a particularly obvious cleaning effect on materials with high mud content and low viscosity. The washed finished sand has high cleanliness, less loss of fine sand, and large processing capacity. At the same time, it adopts hydraulic cyclone separation technology to thoroughly remove impurities such as silt and clay in the mud and sand, and to maximize the recovery of lost fine sand. This equipment improves the quality of washed sand and achieves a reasonable combination of coarse and fine sand grading.

Equipment Composition

It consists of components such as a wheel bucket sand washing machine and a recycling and dewatering machine.

Working principle

1. The sand water mixture enters The sand washing water tank of the wheel bucket is driven by a motor to start rotating, and the digging bucket in the water tank is lifted and separated into sand and water through the digging bucket screen, and then enters the second water wheel for washing;

2. The second wheel bucket sand washing equipment and The principle of Dao is the same; But if the mud content of the raw material exceeds 15%, it is recommended to directly add clean water to the second bucket for washing, and then The quality of finished sand;

3. From the sand washing outlet of the wheel bucket, it enters the high-frequency linear vibration dewatering screen on the dewatering and recovery equipment for further dewatering, mud removal, and medium removal treatment, thereby reducing the mud content and moisture content of the finished sand; At the same time, the wastewater flowing out from the overflow ports of spiral sand washing and wheel bucket sand washing contains a large amount of fine sand. It enters the dehydration and recovery integrated equipment water tank through the overflow pipeline and is transported to After centrifugal classification and concentration in a hydraulic cyclone, the fine sand is discharged into the digging bucket of the wheel bucket sand washing equipment through the cyclone settling nozzle and mixed with coarse, medium and fine sand for dehydration treatment. This can fully The uniform and reasonable combination of coarse and fine sand in the finished product, as well as the fully recyclable fine sand, poses a problem. The quality of the finished sand is higher, the particle size distribution is more uniform, and the finished sand is cleaner;

4. At the same time, different product structures can be designed according to the customer's requirements for raw material properties.

Feature and advantage

1. This device has the advantages of sand washing, dehydration, fine sand recovery, low energy consumption, long service life, easy installation, low maintenance cost, and small footprint.

2. The sand washing and dewatering integrated machine combines a wheeled sand washing machine, a high-frequency linear vibration dewatering screen, and The advantages and characteristics of three types of equipment for hydrocyclones;

3. Greatly reducing the mud, water, dust, impurities, etc. in the sand, and improving the quality of the sand;

4. Energy saving and environmentally friendly, with low energy consumption;

5. The whole machine adopts modular assembly, making transportation convenient and fast; Installation on the construction site only requires bolts to connect it properly;

6. Low failure rate and long service life;

7. Our company can tailor special models for you according to different customer needs.

Technical Parameter